Project Name | Parameter | Specification | |
Model | SK-T6 | ||
Machine parameters | Data output interface | LAN network interface * 1 USB * 2 | |
supply voltage | 100V~240V, 50/60Hz | ||
Rated power | (100W) Maximum | ||
LCD screen | 15 inches 1024 * 768 | ||
Advertising screen | 21.5 inches 1920 * 1080 | ||
ID card recognizer | Second-generation ID card recognizer | ||
Working humidity range (storage temperature range) | 5 ℃~45 ℃ (-10 ℃~+60 ℃) | ||
operating system | Windows 7 32-bit and above | ||
Data transmission method | Network interface WIFI | ||
Overall dimensions | 1599 (length) * 877.5 (width) * 2430.9 (height) mm | ||
weight | Approximately 100KG | ||
measurement system | Ultrasonic measurement (high-precision temperature difference compensation) | ||
measuring range | 70.0-200cm | ||
Allowable error | ± 0.5cm | ||
measurement system | Precision balance beam pressure sensor weighing | ||
body mass index | Automatically and intelligently calculating body mass index | ||
measuring range | 1-300kg | ||
Allowable error | ± 0.1kg | ||
Measurement frequency band | Multi frequency 4-electrode | ||
Electrode material | Electroplating materials | ||
measuring range | 200-1000 Ω | ||
Display exact digits | 0.1 ℃ | ||
Human body temperature measurement mode | 32.0~42.5 ℃ | ||
accuracy | ≤ ± 0.3 ℃ | ||
power dissipation | ≤ 120kw | ||
Measure distance | 5 to 8 centimeters | ||
Automatic shutdown | About 15 seconds | ||
Collection method | 12 lead synchronous electrocardiogram | ||
Power input | d. C5.0V (powered by computer USB port)/dc3.0V (powered by alkaline battery) | ||
sampling frequency | 500Hz | ||
Calibration voltage | Calibration voltage: 1 mV+5%. | ||
Gain setting and accuracy | 5 mm/mV (x0.5), 10 mm/mV (x1), and 20 mm/mV (x2) should be provided | ||
Input impedance | ≥ 5.0 Ω | ||
Low frequency characteristics | Time constant not less than 3.2 seconds | ||
Paper feeding speed | At least three levels of 12.5 mm/s, 25 mm/s, and 50 mm/s, with an error range of ± 5% | ||
Operating temperature | 5 ℃~40 ℃ | ||
ambient temperature | 30% to 80% non condensing | ||
Atmospheric pressure range | 70KPa~106KPa | ||
Heart rate measurement range | 30bpm~240bpm | ||
Heart rate measurement accuracy | Take the maximum value of ± 2bpm or ± 2% | ||
Waveform display sensitivity | 5.0mm/mv error ± 10% | ||
scanning speed | 20mm/s error ± 10% | ||
Input impedance | ≥ 5.0 Ω | ||
working voltage | d. C. 2.5V ± 0.2V | ||
measuring range | Pressure (0-300) mmHg [(0-40) kPa] | ||
Measurement accuracy | Pulse rate: 30 times/minute~200 times/minute,Pressure within 2mm Hg (± 0.267 kPa),Pulse rate within 2% | ||
screen | LCD screen | ||
transmission mode | 232 serial port/USB | ||
Power supply | Power adapter (input a.c. 100V~240V, 50/60Hz, output d. c. 12V, 3.5A) | ||
Using temperature and humidity | 5 ℃~40 ℃, 15% RH~80% RH | ||
Transportation and storage temperature and humidity | -20 ℃~+55 ℃, ≤ 93% RH | ||
Operating atmospheric pressure | 80kPa~106kPa | ||
Transportation and storage atmospheric pressure | 50kPa~106kPa | ||
External dimensions | 387.7mm (length) x 244.1mm (width) x 340.2mm (height) | ||
Host weight | Approximately 6.0Kg | ||
Cuff straps are suitable for circumference range | 17cm~42cm | ||
sensor | Dual wavelength light-emitting diode | ||
wavelength | Red light: 663nm;Infrared light: 890nm | ||
measuring range | 35% to 100% | ||
Maximum average optical output power | ≤ 2mW | ||
measurement error | Within the range of 70% to 100%, the measurement error is ± 2% | ||
Pulse rate measurement error | The monitoring error between 30-250bpm is ± 2bpm or ±% 2, whichever is the maximum | ||
Physical examination | Fingertip microvascular whole blood | ||
Detection time | Blood glucose: 10 seconds Uric acid: 15 seconds Total cholesterol: 26 seconds | ||
Detection scope | Blood glucose: 20-600mg/dL (1.1-33.3mmol/L) Uric acid: 3-20mg/dL (0.18-1.19mmol/L) Total cholesterol: 100-400mg/dL (2.59-10.35mmol/L) | ||
Examination volume | Blood glucose 0.9uL, total cholesterol 10uL, uric acid 1uL | ||
Storage temperature | 10 ℃ -30 ℃ | ||
Operating temperature | 10 ℃ -40 ℃ | ||
relative humidity | <95% | ||
Memory capacity | Blood glucose 360 group, total cholesterol 50 group, uric acid 50 group | ||
Battery type | A 3V (CR2032) button type lithium battery | ||
Battery life | Can be measured approximately 1000 times | ||
resolving power | Black and white (best mode): up to 1200x1200dpi; Black and white (normal mode): up to 600x600dpi | ||
Printer Language | GDI (Host Language Based) | ||
Printing speed | Black and white (normal mode, A4): Up to 20 pages/minute; Black and white (long edge feed), A5): Up to 30 pages/minute | ||
Print load | Up to 10000 pages | ||
First printing time | Black and white (A4, ready mode): only 8.3 seconds; Black and white (A4, sleep mode): up to 18 seconds | ||
weight | 4.18 kg | ||
interface | High speed USB 2.0 port | ||
system parameter | Windows?: 7 (32/64 bit), 2008 Server R2,8 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit), 2012 Server, 2016 Server | ||
size | 331 * 215 * 178 millimeters | ||
Memory | 64 MB | ||
source | Power type: built-in power supply; Power requirements: 110V input voltage: 110-127V AC, 50/60Hz; 220V input voltage: 220-240V AC, 50/60Hz | ||
Copyright © 2025 by Shenzhen Sonka Medical Technology Co., Limited - Privacy policy
